How much VRAM does Nemotron Super 49B Instruct need?
Nemotron Super 49B Instruct needs about 29.8 GB of VRAM at Q4_K_M, or 51.7 GB at Q8_0 and 96.6 GB at FP16. No consumer card holds it at Q4_K_M. The smallest fit in our set is the RTX 5090 (32 GB). Weights plus runtime overhead. Budget separately for KV cache, which at 128K is a material share.
Weights-plus-runtime footprint across the six most common quantizations. KV cache is context-dependent and comes on top. At 128K it is gigabytes on its own, before the weights; size it precisely in the GPU Memory Calculator.
Can your GPU run Nemotron Super 49B Instruct?
Pick your card — the answer below is computed by the same engine that produces every figure on this page.
A100 40GB runs Nemotron Super 49B Instruct at Q4_K_M with 8.2 GB to spare; room left for context and everyday runtime pressure.
Weights plus runtime overhead. KV cache is not included — it depends on context length and this model’s published architecture.
| Weights (Q4_K_M) | 27.7 GB |
| Runtime overhead | 2.1 GB |
| Estimated total | 29.8 GB |
| Usable VRAM (95% of 40 GB) | 38.0 GB |
Across every GPU we track
- RTX 3060 12GBNot enough-18.4 GB
- RTX 4060 Ti 16GBNot enough-14.6 GB
- RTX 4070 Ti SUPERNot enough-14.6 GB
- RTX 3090Not enough-7.0 GB
- RTX 4090Not enough-7.0 GB
- RTX 5090Tight+0.6 GB
- A100 40GBRecommended+8.2 GB
- RTX A6000Recommended+15.8 GB
- L40SRecommended+15.8 GB
- A100 80GBExcellent+46.2 GB
- H100 80GBExcellent+46.2 GB
- H200 141GBExcellent+104.2 GB
Estimates, not guarantees: real usage moves with runtime, driver, batch size and context. Size a specific context window in the GPU Memory Calculator.
How was this number calculated? Every figure here comes from Bitpute’s documented calculation methodology — parameters, precision, quantization, runtime overhead and usable VRAM, each formula written out in full.
Memory by quantization
| Quant | Weights | + runtime overhead |
|---|---|---|
| FP16 | 91.3 GB | 96.6 GB |
| Q8_0 | 48.5 GB | 51.7 GB |
| Q6_K | 37.4 GB | 40.0 GB |
| Q5_K_M | 32.5 GB | 34.8 GB |
| Q4_K_M | 27.7 GB | 29.8 GB |
| Q4_0 | 25.7 GB | 27.7 GB |
Overhead = 0.75 GB + 5% of weights (CUDA context, buffers). Add KV cache on top. Weights dominate at this size, but a 128K window still costs gigabytes.
Which quantization should you actually run?
For Nemotron Super 49B Instruct, the single-GPU entry point is Q4_K_M (29.8 GB) on RTX A6000, with plenty of headroom for long context. Higher quality (Q6_K 40.0 GB, FP16 96.6 GB) needs a 48 GB+ card or multiple GPUs — for occasional use, renting is usually cheaper than buying.
Single-GPU fit at Q4_K_M (29.8 GB + KV)
RTX 3060 12GBRTX 4060 Ti 16GBRTX 4070 Ti SUPERRTX 3090RTX 4090RTX 5090A100 40GBRTX A6000L40SA100 80GBH100 80GBH200 141GB
Where the memory goes
Weights and overhead are exact for Q4_K_M. The KV bar is a generic 32-layer transformer at 8K; at this scale the weights dominate, but long context still adds gigabytes — size it in the calculator is for.
Deciding how much headroom to buy at this tier? RTX 5090 vs A100 40GB compares them on bandwidth, power and which models each one holds.
Common questions
How much VRAM does Nemotron Super 49B Instruct need?
Nemotron Super 49B Instruct needs about 29.8 GB of VRAM at Q4_K_M, 51.7 GB at Q8_0, or 96.6 GB at FP16. That is weights plus about 0.75 GB of runtime overhead and 5% of weight size; KV cache is additional and depends on context length.
What GPU can run Nemotron Super 49B Instruct?
At Q4_K_M the smallest card in our set that fits is the RTX 5090 (32 GB usable at 95%). At FP16 you need the H200 141GB (141 GB) or larger.
Can Nemotron Super 49B Instruct run on 24 GB?
Not at Q4_K_M: it needs about 29.8 GB, more than the ~22.8 GB usable on a 24 GB card. Use a larger card, multiple GPUs, or offload.
More in the Nemotron family
Nemotron Nano 9B v2 InstructNemotron Llama-3.1 51B InstructNemotron Llama-3.1 70B InstructNemotron Ultra 253B InstructNemotron 4 340B Instruct