How much VRAM does DeepSeek LLM 67B Chat need?
DeepSeek LLM 67B Chat needs about 40.5 GB of VRAM at Q4_K_M, or 70.4 GB at Q8_0 and 131.8 GB at FP16. No consumer card holds it at Q4_K_M. The smallest fit in our set is the RTX A6000 (48 GB). Weights plus runtime overhead; with only 4K of context the cache stays small.
Weights-plus-runtime footprint across the six most common quantizations. KV cache is context-dependent and comes on top. The 4K window is short, so weights dominate the budget; size it precisely in the GPU Memory Calculator.
This is the instruction-tuned checkpoint: the same architecture and the same memory footprint as the base model, fine-tuned to follow prompts and hold a conversation. If you intend to fine-tune on your own data, start from DeepSeek LLM 67B instead.
Can your GPU run DeepSeek LLM 67B Chat?
Pick your card — the answer below is computed by the same engine that produces every figure on this page.
RTX A6000 runs DeepSeek LLM 67B Chat at Q4_K_M with 5.1 GB to spare; comfortable at this size, where most cards cannot hold the weights at all.
Weights plus runtime overhead. KV cache is not included — it depends on context length and this model’s published architecture.
| Weights (Q4_K_M) | 37.8 GB |
| Runtime overhead | 2.6 GB |
| Estimated total | 40.5 GB |
| Usable VRAM (95% of 48 GB) | 45.6 GB |
Across every GPU we track
- RTX 3060 12GBNot enough-29.1 GB
- RTX 4060 Ti 16GBNot enough-25.3 GB
- RTX 4070 Ti SUPERNot enough-25.3 GB
- RTX 3090Not enough-17.7 GB
- RTX 4090Not enough-17.7 GB
- RTX 5090Not enough-10.1 GB
- A100 40GBNot enough-2.5 GB
- RTX A6000Recommended+5.1 GB
- L40SRecommended+5.1 GB
- A100 80GBExcellent+35.5 GB
- H100 80GBExcellent+35.5 GB
- H200 141GBExcellent+93.5 GB
Estimates, not guarantees: real usage moves with runtime, driver, batch size and context. Size a specific context window in the GPU Memory Calculator.
How was this number calculated? Every figure here comes from Bitpute’s documented calculation methodology — parameters, precision, quantization, runtime overhead and usable VRAM, each formula written out in full.
Memory by quantization
| Quant | Weights | + runtime overhead |
|---|---|---|
| FP16 | 124.8 GB | 131.8 GB |
| Q8_0 | 66.3 GB | 70.4 GB |
| Q6_K | 51.2 GB | 54.5 GB |
| Q5_K_M | 44.4 GB | 47.4 GB |
| Q4_K_M | 37.8 GB | 40.5 GB |
| Q4_0 | 35.1 GB | 37.6 GB |
Overhead = 0.75 GB + 5% of weights (CUDA context, buffers). Add KV cache on top. With only 4K of context, weights dominate the budget.
Which quantization should you actually run?
For DeepSeek LLM 67B Chat, the single-GPU entry point is Q4_K_M (40.5 GB) on RTX A6000, with plenty of headroom for long context. Higher quality (Q6_K 54.5 GB, FP16 131.8 GB) needs A100 80GB or multiple GPUs — for occasional use, renting is usually cheaper than buying.
Single-GPU fit at Q4_K_M (40.5 GB + KV)
RTX 3060 12GBRTX 4060 Ti 16GBRTX 4070 Ti SUPERRTX 3090RTX 4090RTX 5090A100 40GBRTX A6000L40SA100 80GBH100 80GBH200 141GB
Where the memory goes
Weights and overhead are exact for Q4_K_M. The KV bar is a generic 32-layer transformer at 8K; at this scale the weights dominate, but long context still adds gigabytes — size it in the calculator is for.
Deciding how much headroom to buy at this tier? RTX A6000 vs A100 80GB compares them on bandwidth, power and which models each one holds.
Common questions
How much VRAM does DeepSeek LLM 67B Chat need?
DeepSeek LLM 67B Chat needs about 40.5 GB of VRAM at Q4_K_M, 70.4 GB at Q8_0, or 131.8 GB at FP16. That is weights plus about 0.75 GB of runtime overhead and 5% of weight size; KV cache is additional and depends on context length.
What GPU can run DeepSeek LLM 67B Chat?
At Q4_K_M the smallest card in our set that fits is the RTX A6000 (48 GB usable at 95%). At FP16 you need the H200 141GB (141 GB) or larger.
Can DeepSeek LLM 67B Chat run on 24 GB?
Not at Q4_K_M: it needs about 40.5 GB, more than the ~22.8 GB usable on a 24 GB card. Use a larger card, multiple GPUs, or offload.
Same memory footprint as 1 other checkpoint
DeepSeek LLM 67B Chat has an identical parameter count to this, so every figure on this page applies to it unchanged. What varies is different checkpoint roles (base) — not the size. Choose on capability and licence; the memory budget is identical.